5 Tons / Day Small Block Ice Making Machine With Aluminium Alloy Ice Module

Ice Block Maker Description

Ice block machine has the lowest surface/ volume ratio, thus gives a cooling effect over the longest period of time.

Allcold offers “plug and play” ice block machine specially designed for tropical conditions and coastal climate. All relevant parts are made of stainless or galvanized steel. The brine-tank is fully insulated. The ice-cans can are made out of stainless steel.

The freezing cycle of ice block machine takes about 8 or 12 hours, corresponding to two or three continuous harvests per day, the basis of the indicated daily capacity. The system operated fully automatically. Standard block weight varies from 12.5 to 50kg. Tailor made design is possible.

Application Fields

1. Ice factory at ports and docks.

2. Fresh preservation and cooling of aquatic products

3. Fresh preservation of aquatic products and foods during line haul.

4. Temperature reduction and cooling in special fields.

5. Ice sculpture.

6. Edible ice.

Features of Ice Block Maker 

1. Bitzer/Copeland/Hanbell refrigeration system to guarantee performance;

2. Safe operation, low risk and cost, and big output;

3. Aluminium alloy made ice module;

4. Customized ice size and cycle quantity;

5. Water/air cooling for chooses;

6. Good appearance,easy opeartion and maintenance

Advantages of ALLCOLD

1. Original refrigeration equipment manufacturer with rich experience;
2. One-station solution for cold chain equipment;
3. Many successful cases overseas.

4. Many agents and partners all over the world. such as USA, Japan, Greece, Cyprus, Irland, Turkey, Philippines etc.
5. Professional team for solution design, production, installment and after-sale service

Ice Block Maker Installation

1. Installing by the user:

We will tested and install well the machine before shipment, all necessary spare parts, operation manual are provided to guide the installation.

2. Installing by Rang Refrigeration engineers:

• We can send our engineer to assist the installation and provide technical support and train your workers. The end-user provide accommodation and round-trip ticket for our engineer.
• Before our engineer arrived in your site, the installation place, electricity, water and installation tools should be ready. Meanwhile, we will provide you a Tool List with the machine when delivery.
• All spare parts are provided according to our standard. During installation period, any shortage of parts due to the actual installation site, the buyer is required to afford the cost, such as water pipes.
• 2~ 3 workers are required to assist the installation for big project.

Ice Block Maker Operation

1. Adjust the machine. Make salty water as secondary refrigerant according with user manual. Fill water into ice moulds. Turn on the machine.

2. After ice block is frozen, take out the ice moulds and sink them into an unfreezing tank. Turn the ice moulds up side down and pour ice block out of the moulds. Carry the ice blocks into ice storage cool room.

3. Put the ice moulds back into the machines. Fill water in them and start the second batch.